What's the deal with the reformulation?
Since most factory wraps are only glued at the beginning and end with adhesive strips, full permanent adhesive coverage is not necessary. The feedback we've received over the past year has led us to discontinue the use of repositionable adhesive, Half of the people liked it, the other half were indifferent. The new materials are higher quality and they are a little thicker. Remember, it's the hardware that holds your wrap on either way, and our current material can still be glued to the shell as some drum customizers like to do.
How thick are snapz wraps?
Satin - 22mil
Gloss - 20mil
Metalized - 25mil
Sparkle - 25mil
The thickness is comparable to mid range factory wraps, thicker than low-end factory covering and some aftermarket wraps.

Gloss - Satin - Sparkle/Metalized - Hybrid: What am I ordering?
Printed designs, like our wood, skulls, flags, etc... are offered in a gloss or satin finish.
Sparkle and Metalized materials, like diamond plate and metal flake materials are non-printed specialty materials that we offer only in a gloss finish.
Hybrid Wraps are where we use our Sparkle/Metalized materials and combine them with our print process for extremely unique designs.

Is your big ugly logo printed on my wrap?
Hey wait a minute buddy, our logo isn't ugly. No advertising printed on our wraps, but we do know what your getting at. It seems that some wrap companies want to print their logo right on the wraps, not here. Our thought on this is, Hey we included a set of CazDrum Custom badges with the kit, use 'em if you think they look cool.
Are snapz wraps precut or do I have to trim them?
All of our snapz wraps come precut to fit. We knock anywhere from .5" to .625" off the measured depth that you send us. Our wraps are custom made and trimmed to specification on a per order basis and are not cut from bulk rolls. We manufacture our own products in-house.
Are bass drum hoop strips included or do they cost extra?
Hoop strips are included only if requested and there is no additional charge if purchased at the same time as your full wrap kit. This is a bonus since other wrap companies charge for this service, whether purchased at the same time or not. We can sell them separately for a nominal fee but again, if requested at the time of purchase with your wrap kit, there is no additional charge.
Are snapz wraps seamless?
Yes, up to 28" in shell depth by whatever diameter you can dream up, all in one piece. Even our metalized wraps and hoop strips are all one piece.
Can my new wrap be installed over the old finish?
Our wraps can easily be installed over factory lacquer finishes. Our recommendation: If the old wrap can be removed, then it should be removed. If your old wrap or shell are not smooth then chances are that your new wrap will not be smooth either. The main issue becomes weather or not the combined thickness of the old and new wraps will still allow for your hardware screws to have enough thread remaining to securely reattach the hardware.

Email us if you have any other questions